The first table saw was invented in the 18th century. The woodwork tool has a fixed arbor and table. You had to move the table in the up-down movement to cut wood at different heights. It was bulky in weight through the blade was made of steel hence its strength. It used a circular motion in cutting wood. The hand-held tool was cumbersome but could cut plastic and metal in addition to wood. It used a hydraulic motor as a source of power.
The inventor was Samuel Miller from Southampton in England in 1777. To cut wood from the tool, you had two options: either to clamp it in its vise or hold the part you need to cut on the blade and start the motor for the blade to rotate in a circular motion and cut it. Each tooth of the blade pierced the wood and chippings would drop, this was to avoid the teeth from grinding on the blade. The abrasive wheel also helped cut the wood. The main advantage of the thin blade was a smooth surface after the cut. The tool was designed such that the wood was accurately cut, and in a straight line since the clamp help the wood in a perpendicular position between the blade and the wood. The table bench was used mostly in sawmills to cut wood into desired pieces for making block and furniture. And sometimes, this is used wood planner. Check planer review comparison here: www.bestcabinettablesaw.com
Uses of the table saw
It was an ideal tool when you needed to cut wood into small pieces. For large wood, it was cumbersome to be handheld or clamped on the blade. This was the main reason for more invention and innovation of better table saw with different technology. In case you place too much wood on the blade, it will not clamp tightly and further, the blade will not spin for the teeth to be in contact with the wood to enable cutting.
To avoid wastage, it was important to make your own calculations so that the measurements are accurate with minimal wood wastage. A unique feature of the first table saw was the fact that you could use it with either left hand or right hand. The best way to hold the wood for cutting was to interchange the sides between holding and motor position. If you hold on the right, the motor should be on the left as well as the blade and vice versa. The shafts that support the blade were metallic and propelled horizontally towards the motor and vertically to the wood.
Despite the portability of the saw, the steel used in developing it was bulky and cumbersome to carry. The current table saws are modified, though using the same concept in cutting, but the motor is powered by electricity, which is faster. Most of the functions are also automatic as opposed to the old table saw whose functions were manually handheld. After the first table saw, there are many other saws developed prior to the current machines.
